To what extent is the electromagnetic wave of the static high voltage generator (RAIJIN) generated?

We have no measured data for electromagnetic waves generated at electric discharge.

What is the voltage of electricity generated by the static high voltage generator?

Generated voltage: 150,000 V.

Is it alright to clean the belt of the static high voltage generator with alcohol?

Immerse the belt in ethanol for disinfection to remove oil and dirt, and hang and dry it in the shade. Always read the Operation Manual before starting cleaning. Cleaning of the belt affects the performance of the equipment.

How much power does the static high voltage generator consume?

30 – 50 W.

Is there a book that provides basic information on the static high voltage generator in detail so that a teacher not familiar with the generator can easliy

No special document other then the Operation Manual is available. Read the Operation Manual before starting any test. The observation of the “Cautions” section will prevent accidents such as electric shock.

We want to perform a test where the approach of a finger charged statically to city water flowing from a faucet bends the flowing water down. Is there inexpensive test equipment that enables this test?

Static high voltage generator RAIJIN generates the most stable static electricity. However, it is very dangerous when a charged person touches city water or another object because of the shock from static electricity.

What are the materials of the upper and lower rollers of the static high voltage generator?

Upper roller: Teflon; lower roller: acryl; belt: silicone rubber.

Is it dangerous for students with heart disease to perform a test using the static high voltage generator?

Do not allow any student with heart disease to perform the test. When a student with heart disease is exposed to electric shock during the test, the heart my be adversely affected.

A test photograph showing the hair standing on end was seen in a brochure. Is it dangerous to charge a person standing on a rubber plate?

Since the thin rubber sheet may shorten the distance between the floor and the person,  shock may be generated when static electricity flows to the floor. Prepare an insulation board using insulators to secure a height of 10 cm or more between the floor and the human foot on the board. Make the person stand on the insulation board to touch the current collector ball of the static high voltage generator RAIJIN with a hand.Then turn ON the power supply of the static high voltage generator RAIJIN to generate static electricity. Now the hairs will stand on end gradually. The person who has experienced this test should wait until static electricity is discharged into the